FAUCET REPAIR & INSTALLATION · Nampa, ID
Faucet Repair & Installation in Nampa, ID
A faucet that drips all night or a fixture you have wanted to replace. Small jobs, but the hard water here wears them faster than most places, so they come up often.
- Licensed and insured
- Quoted before work starts
- Answered around the clock
A drip is never just a drip
A faucet that drips is wasting water every hour, and on Nampa's hard water the cause is usually a worn cartridge or seal that mineral buildup has chewed up faster than it would elsewhere. It is a small repair, but ignoring it wastes a surprising amount of water over a year and often gets worse rather than better. The same minerals clog aerators and shower heads, which is why the flow from a faucet slowly drops until it is cleaned or replaced.
Because the parts wear faster here, faucet work is one of the more routine calls we get. It is rarely dramatic, but it is worth doing before a slow drip becomes a fixture that will not shut off at all.
Repair or replace the fixture
Whether to repair or replace depends on the faucet. A quality fixture with a worn cartridge is worth rebuilding, since the body is sound and a new cartridge restores it. A cheap builder-grade faucet that is corroding, or one where parts are no longer made, is better replaced, because you will be back at it soon otherwise. If you are replacing for looks rather than failure, that is a straightforward swap, and we check the shutoff valves under the sink while we are there, since old valves that will not turn are their own small emergency waiting to happen.
New fixture installs also cover the supply lines, which are cheap to replace and a common quiet leak source when they age.
Worth a faucet call when:
- A faucet drips even when firmly closed
- Flow has dropped to a trickle from mineral buildup
- The handle is stiff, loose or leaks at the base
- A shutoff valve under the sink will not turn
- You are updating fixtures and want it done cleanly
The small jobs that prevent the big ones
Faucet work is a good moment to catch things that are cheap now and expensive later. The shutoff valves under a sink should turn freely, because when a supply line fails you want to close the local valve, not run for the main. Corroded supply lines and a slow leak at the base of a faucet are the kind of thing that quietly feeds a cabinet with water until the particleboard swells. Handling them during a routine fixture call is far cheaper than the water damage that a hidden under-sink leak causes.
If a fixture problem turns out to be pressure or a supply issue rather than the faucet itself, that can point to a leak elsewhere, and we will follow it rather than just swap the visible part.
A kitchen faucet swap is also the natural moment to sort out the extras that share that cabinet. If you have been thinking about a dedicated drinking-water tap, a filtration system, that plumbing lands right where we are already working, and a faucet call is a tidy time to add it rather than opening the cabinet up twice.
QUESTIONS
Faucet questions in Nampa
Why does my faucet drip even when it is off?
Usually a worn cartridge or seal, and on our hard water those wear faster because mineral buildup grinds at them. It is a small repair on a good faucet. Left alone, a drip tends to worsen and can eventually become a handle that will not shut the water off at all, so it is worth doing sooner.
My water pressure at one faucet is low. Is that the faucet?
Often it is just the aerator, the little screen at the tip, clogged with mineral scale. Cleaning or replacing it restores the flow. If several fixtures have dropped at once, that is a bigger pressure or supply question and worth looking into rather than cleaning one aerator at a time.
Should I repair or replace a faucet?
Repair a quality faucet with a worn part, since the body is sound. Replace a cheap or corroding one, or one where parts are no longer available, because you will be back at it soon. If you are updating for looks, it is a clean swap, and we check the shutoff valves under the sink while we are there.
Can you install a faucet I bought myself?
Yes. We install fixtures you have purchased, confirm they fit your setup, replace the supply lines and check the shutoffs, and make sure there are no leaks before we leave. Bringing your own fixture is common and we are happy to handle just the install.
Faucet dripping or ready for a swap?
Small job, quick fix. Call and we will handle the drip, the fixture, and the valves you will be glad work later.